Read the appropriate registers for RTL8139, RTL8168 and E1000.
For NE2000 just assume 10mbit full duplex as there is no indicator
for it in the pure NE2000 spec. Mock values for loopback.
Allocate all the RX buffers in one big memory region (and same for TX.)
This removes 38 lines from every crash dump (and just seems like a
reasonable idea in general.)
This commit converts naked `new`s to `AK::try_make` and `AK::try_create`
wherever possible. If the called constructor is private, this can not be
done, so we instead now use the standard-defined and compiler-agnostic
`new (nothrow)`.
If we are in a shared interrupt handler, the called handlers might
indicate it was not their interrupt, so we should not increment the
call counter of these handlers.
We call it E1000E, because the layout for these cards is somewhat not
the same like E1000 supported cards.
Also, this card supports advanced features that are not supported on
8254x cards.
Instead of initializing network adapters in init.cpp, let's move that
logic into a separate class to handle this.
Also, it seems like a good idea to shift responsiblity on enumeration
of network adapters after the boot process, so this singleton will take
care of finding the appropriate network adapter when asked to with an
IPv4 address or interface name.
With this change being merged, we simplify the creation logic of
NetworkAdapter derived classes, so we enumerate the PCI bus only once,
searching for driver candidates when doing so, and we let each driver
to test if it is resposible for the specified PCI device.
There's no good reason to distinguish between network interfaces based
on their model. It's probably a good idea to try keep the names more
persistent so scripts written for a specific network interface will be
useable after hotplug event (or after rebooting with new hardware
setup).
The previous patch already helped with this, however my idea of only
reading a few packets didn't work and we'd still sometimes end up not
receiving any more packets from the E1000 interface.
With this patch applied my NIC seems to receive packets just fine, at
least for now.
Previously the E1000 network adapter would stop receiving further
packets when an RX buffer overrun occurred. This was the case
when connecting the adapter to a real network where enough broadcast
traffic caused the buffer to be full before the kernel had a chance
to clear the RX buffer.
SPDX License Identifiers are a more compact / standardized
way of representing file license information.
See: https://spdx.dev/resources/use/#identifiers
This was done with the `ambr` search and replace tool.
ambr --no-parent-ignore --key-from-file --rep-from-file key.txt rep.txt *
Mostly due to the fact that clang-format allows aligned comments via
AlignTrailingComments.
We could also use raw string literals in inline asm, which clang-format
deals with properly (and would be nicer in a lot of places).
(...and ASSERT_NOT_REACHED => VERIFY_NOT_REACHED)
Since all of these checks are done in release builds as well,
let's rename them to VERIFY to prevent confusion, as everyone is
used to assertions being compiled out in release.
We can introduce a new ASSERT macro that is specifically for debug
checks, but I'm doing this wholesale conversion first since we've
accumulated thousands of these already, and it's not immediately
obvious which ones are suitable for ASSERT.
In preparation for marking BlockingResult [[nodiscard]], there are a few
places that perform infinite waits, which we never observe the result of
the wait. Instead of suppressing them, add an alternate function which
returns void when performing and infinite wait.
If we try to align a number above 0xfffff000 to the next multiple of
the page size (4 KiB), it would wrap around to 0. This is most likely
never what we want, so let's assert if that happens.
Now that we no longer need to support the signal trampolines being
user-accessible inside the kernel memory range, we can get rid of the
"kernel" and "user-accessible" flags on Region and simply use the
address of the region to determine whether it's kernel or user.
This also tightens the page table mapping code, since it can now set
user-accessibility based solely on the virtual address of a page.
This was done with the help of several scripts, I dump them here to
easily find them later:
awk '/#ifdef/ { print "#cmakedefine01 "$2 }' AK/Debug.h.in
for debug_macro in $(awk '/#ifdef/ { print $2 }' AK/Debug.h.in)
do
find . \( -name '*.cpp' -o -name '*.h' -o -name '*.in' \) -not -path './Toolchain/*' -not -path './Build/*' -exec sed -i -E 's/#ifdef '$debug_macro'/#if '$debug_macro'/' {} \;
done
# Remember to remove WRAPPER_GERNERATOR_DEBUG from the list.
awk '/#cmake/ { print "set("$2" ON)" }' AK/Debug.h.in
Problem:
- Many constructors are defined as `{}` rather than using the ` =
default` compiler-provided constructor.
- Some types provide an implicit conversion operator from `nullptr_t`
instead of requiring the caller to default construct. This violates
the C++ Core Guidelines suggestion to declare single-argument
constructors explicit
(https://isocpp.github.io/CppCoreGuidelines/CppCoreGuidelines#c46-by-default-declare-single-argument-constructors-explicit).
Solution:
- Change default constructors to use the compiler-provided default
constructor.
- Remove implicit conversion operators from `nullptr_t` and change
usage to enforce type consistency without conversion.
Compared to version 10 this fixes a bunch of formatting issues, mostly
around structs/classes with attributes like [[gnu::packed]], and
incorrect insertion of spaces in parameter types ("T &"/"T &&").
I also removed a bunch of // clang-format off/on and FIXME comments that
are no longer relevant - on the other hand it tried to destroy a couple of
neatly formatted comments, so I had to add some as well.
Since they're all covered by the same spec sheet, we can expect
the same code to cover most of the devices.
It can't currently differentiate between them, which would be nice to
add for determining what registers we can access.
Problem:
- `(void)` simply casts the expression to void. This is understood to
indicate that it is ignored, but this is really a compiler trick to
get the compiler to not generate a warning.
Solution:
- Use the `[[maybe_unused]]` attribute to indicate the value is unused.
Note:
- Functions taking a `(void)` argument list have also been changed to
`()` because this is not needed and shows up in the same grep
command.
Fix some problems with join blocks where the joining thread block
condition was added twice, which lead to a crash when trying to
unblock that condition a second time.
Deferred block condition evaluation by File objects were also not
properly keeping the File object alive, which lead to some random
crashes and corruption problems.
Other problems were caused by the fact that the Queued state didn't
handle signals/interruptions consistently. To solve these issues we
remove this state entirely, along with Thread::wait_on and change
the WaitQueue into a BlockCondition instead.
Also, deliver signals even if there isn't going to be a context switch
to another thread.
Fixes#4336 and #4330
Problem:
- C-style arrays do not automatically provide bounds checking and are
less type safe overall.
- `__builtin_memcmp` is not a constant expression in the current gcc.
Solution:
- Change private m_data to be AK::Array.
- Eliminate constructor from C-style array.
- Change users of the C-style array constructor to use the default
constructor.
- Change `operator==()` to be a hand-written comparison loop and let
the optimizer figure out to use `memcmp`.
The Lock class still permits no reason, but for everything else
require a reason to be passed to Thread::wait_on. This makes it
easier to diagnose why a Thread is in Queued state.
Random now gets entropy from the following drivers:
- KeyboardDevice
- PATAChannel
- PS2MouseDevice
- E1000NetworkAdapter
- RTL8139NetworkAdapter
Of these devices, PS2MouseDevice and PATAChannel provide the vast
majority of the entropy.
