If we are in a shared interrupt handler, the called handlers might
indicate it was not their interrupt, so we should not increment the
call counter of these handlers.
The overall design is the same, but we change a few things,
like decreasing the amount of blocking forever loops. The goal
is to ensure the kernel won't hang forever when dealing with
buggy hardware.
Also, we reset the channel when initializing it, just in case the
hardware was in bad state before we start use it.
SPDX License Identifiers are a more compact / standardized
way of representing file license information.
See: https://spdx.dev/resources/use/#identifiers
This was done with the `ambr` search and replace tool.
ambr --no-parent-ignore --key-from-file --rep-from-file key.txt rep.txt *
Also handle native and compatibility channel modes together, so if only
one IDE channel was set to work on PCI native mode, we need to handle it
separately, so the other channel continue to operate with the legacy IO
ports and interrupt line.
Although unlikely to happen, a user can have an IDE controller that
doesn't support bus master capability. If that's the case, we need to
check for this, and create an IDEChannel (not BMIDEChannel) to allow
IO operations with the controller.
If the user requests to force PIO mode, we just create IDEChannel
objects which are capable of sending PIO commands only.
However, if the user doesn't force PIO mode, we create BMIDEChannel
objects, which are sending DMA commands.
This change is somewhat simplifying the code, so each class is
supporting its type of operation - PIO or DMA. The PATADiskDevice
should not care if DMA is enabled or not.
Later on, we could write an IDEChannel class for UDMA modes,
that are available and documented on Intel specifications for their IDE
controllers.
Technically not supported by the original ATA specification, IDE
hot swapping is still in practice possible, so the only sane way
to start support it is with ref-counting the IDEChannel object so if we
remove a PATADiskDevice, it's not gone with it.
This replaces the current disk detection and disk access code with
code based on https://wiki.osdev.org/IDE
This allows the system to boot on VirtualBox with serial debugging
enabled and VMWare Player.
I believe there were several issues with the current code:
- It didn't utilise the last 8 bits of the LBA in 24-bit mode.
- {read,write}_sectors_with_dma was not setting the obsolete bits,
which according to OSdev wiki aren't used but should be set.
- The PIO and DMA methods were using slightly different copy
and pasted access code, which is now put into a single
function called "ata_access"
- PIO mode doesn't work. This doesn't fix that and should
be looked into in the future.
- The detection code was not checking for ATA/ATAPI.
- The detection code accidentally had cyls/heads/spt as 8-bit,
when they're 16-bit.
- The capabilities of the device were not considered. This is now
brought in and is currently used to check if the device supports
LBA. If not, use CHS.
This new subsystem is somewhat replacing the IDE disk code we had with a
new flexible design.
StorageDevice is a generic class that represent a generic storage
device. It is meant that specific storage hardware will override the
interface. StorageController is a generic class that represent
a storage controller that can be found in a machine.
The IDEController class governs two IDEChannels. An IDEChannel is
responsible to manage the master & slave devices of the channel,
therefore an IDEChannel is an IRQHandler.
2020-12-21 00:19:21 +01:00
Renamed from Kernel/Devices/PATAChannel.h (Browse further)
