PT_SETTREGS sets the regsiters of the traced thread. It can only be
used when the tracee is stopped.
Also, refactor ptrace.
The implementation was getting long and cluttered the alraedy large
Process.cpp file.
This commit moves the bulk of the implementation to Kernel/Ptrace.cpp,
and factors out peek & poke to separate methods of the Process class.
This was a missing feature in the PT_TRACEME command.
This feature allows the tracer to interact with the tracee before the
tracee has started executing its program.
It will be useful for automatically inserting a breakpoint at a
debugged program's entry point.
PT_POKE writes a single word to the tracee's address space.
Some caveats:
- If the user requests to write to an address in a read-only region, we
temporarily change the page's protections to allow it.
- If the user requests to write to a region that's backed by a
SharedInodeVMObject, we replace the vmobject with a PrivateIndoeVMObject.
This patch adds the minherit() syscall originally invented by OpenBSD.
Only the MAP_INHERIT_ZERO mode is supported for now. If set on an mmap
region, that region will be zeroed out on fork().
These validate_elf_* methods really had no business being static
methods of ELF::Image. Now that the ELF namespace exists, it makes
sense to just move them to be free functions in the namespace.
If we don't support ACPI, just don't instantiate an ACPI parser.
This is way less confusing than having a special parser class whose
only purpose is to do nothing.
We now search for the RSDP in ACPI::initialize() instead of letting
the parser constructor do it. This allows us to defer the decision
to create a parser until we're sure we can make a useful one.
This commit adds a basic implementation of
the ptrace syscall, which allows one process
(the tracer) to control another process (the tracee).
While a process is being traced, it is stopped whenever a signal is
received (other than SIGCONT).
The tracer can start tracing another thread with PT_ATTACH,
which causes the tracee to stop.
From there, the tracer can use PT_CONTINUE
to continue the execution of the tracee,
or use other request codes (which haven't been implemented yet)
to modify the state of the tracee.
Additional request codes are PT_SYSCALL, which causes the tracee to
continue exection but stop at the next entry or exit from a syscall,
and PT_GETREGS which fethces the last saved register set of the tracee
(can be used to inspect syscall arguments and return value).
A special request code is PT_TRACE_ME, which is issued by the tracee
and causes it to stop when it calls execve and wait for the
tracer to attach.
This new subsystem includes better abstractions of how time will be
handled in the OS. We take advantage of the existing RTC timer to aid
in keeping time synchronized. This is standing in contrast to how we
handled time-keeping in the kernel, where the PIT was responsible for
that function in addition to update the scheduler about ticks.
With that new advantage, we can easily change the ticking dynamically
and still keep the time synchronized.
In the process context, we no longer use a fixed declaration of
TICKS_PER_SECOND, but we call the TimeManagement singleton class to
provide us the right value. This allows us to use dynamic ticking in
the future, a feature known as tickless kernel.
The scheduler no longer does by himself the calculation of real time
(Unix time), and just calls the TimeManagment singleton class to provide
the value.
Also, we can use 2 new boot arguments:
- the "time" boot argument accpets either the value "modern", or
"legacy". If "modern" is specified, the time management subsystem will
try to setup HPET. Otherwise, for "legacy" value, the time subsystem
will revert to use the PIT & RTC, leaving HPET disabled.
If this boot argument is not specified, the default pattern is to try
to setup HPET.
- the "hpet" boot argumet accepts either the value "periodic" or
"nonperiodic". If "periodic" is specified, the HPET will scan for
periodic timers, and will assert if none are found. If only one is
found, that timer will be assigned for the time-keeping task. If more
than one is found, both time-keeping task & scheduler-ticking task
will be assigned to periodic timers.
If this boot argument is not specified, the default pattern is to try
to scan for HPET periodic timers. This boot argument has no effect if
HPET is disabled.
In hardware context, PIT & RealTimeClock classes are merely inheriting
from the HardwareTimer class, and they allow to use the old i8254 (PIT)
and RTC devices, managing them via IO ports. By default, the RTC will be
programmed to a frequency of 1024Hz. The PIT will be programmed to a
frequency close to 1000Hz.
About HPET, depending if we need to scan for periodic timers or not,
we try to set a frequency close to 1000Hz for the time-keeping timer
and scheduler-ticking timer. Also, if possible, we try to enable the
Legacy replacement feature of the HPET. This feature if exists,
instructs the chipset to disconnect both i8254 (PIT) and RTC.
This behavior is observable on QEMU, and was verified against the source
code:
ce967e2f33
The HPETComparator class is inheriting from HardwareTimer class, and is
responsible for an individual HPET comparator, which is essentially a
timer. Therefore, it needs to call the singleton HPET class to perform
HPET-related operations.
The new abstraction of Hardware timers brings an opportunity of more new
features in the foreseeable future. For example, we can change the
callback function of each hardware timer, thus it makes it possible to
swap missions between hardware timers, or to allow to use a hardware
timer for other temporary missions (e.g. calibrating the LAPIC timer,
measuring the CPU frequency, etc).
This is similar to 28e1da344d
and 4dd4dd2f3c.
The crux is that wait verifies that the outvalue (siginfo* infop)
is writable *before* waiting, and writes to it *after* waiting.
In the meantime, a concurrent thread can make the output region
unwritable, e.g. by deallocating it.
This is similar to 28e1da344d
and 4dd4dd2f3c.
The crux is that select verifies that the filedescriptor sets
are writable *before* blocking, and writes to them *after* blocking.
In the meantime, a concurrent thread can make the output buffer
unwritable, e.g. by deallocating it.
This is a complete fix of clock_nanosleep, because the thread holds the
process lock again when returning from sleep()/sleep_until().
Therefore, no further concurrent invalidation can occur.
Also, duplicate data in dbg() and klog() calls were removed.
In addition, leakage of virtual address to kernel log is prevented.
This is done by replacing kprintf() calls to dbg() calls with the
leaked data instead.
Also, other kprintf() calls were replaced with klog().
This was only used by the mechanism for mapping executables into each
process's own address space. Now that we remap executables on demand
when needed for symbolication, this can go away.
Previously we would map the entire executable of a program in its own
address space (but make it unavailable to userspace code.)
This patch removes that and changes the symbolication code to remap
the executable on demand (and into the kernel's own address space
instead of the process address space.)
This opens up a couple of further simplifications that will follow.
I had the wrong idea about this. Thanks to Sergey for pointing it out!
Here's what he says (reproduced for posterity):
> Private mappings protect the underlying file from the changes made by
> you, not the other way around. To quote POSIX, "If MAP_PRIVATE is
> specified, modifications to the mapped data by the calling process
> shall be visible only to the calling process and shall not change the
> underlying object. It is unspecified whether modifications to the
> underlying object done after the MAP_PRIVATE mapping is established
> are visible through the MAP_PRIVATE mapping." In practice that means
> that the pages that were already paged in don't get updated when the
> underlying file changes, and the pages that weren't paged in yet will
> load the latest data at that moment.
> The only thing MAP_FILE | MAP_PRIVATE is really useful for is mapping
> a library and performing relocations; it's definitely useless (and
> actively harmful for the system memory usage) if you only read from
> the file.
This effectively reverts e2697c2ddd.
This will be a memory usage pessimization until we actually implement
CoW sharing of the memory pages with SharedInodeVMObject.
However, it's a huge architectural improvement, so let's take it and
improve on this incrementally.
fork() should still be neutral, since all private mappings are CoW'ed.
It's now up to the caller to provide a VMObject when constructing a new
Region object. This will make it easier to handle things going wrong,
like allocation failures, etc.
If we wrote anything we should just inform userspace that we did,
and not worry about the error code. Userspace can call us again if
it wants, and we'll give them the error then.
We don't have to log the process name/PID/TID, dbg() automatically adds
that as a prefix to every line.
Also we don't have to do .characters() on Strings passed to dbg() :^)
You can now mmap a file as private and writable, and the changes you
make will only be visible to you.
This works because internally a MAP_PRIVATE region is backed by a
unique PrivateInodeVMObject instead of using the globally shared
SharedInodeVMObject like we always did before. :^)
Fixes#1045.
