The regression in the "conditional-CSSGroupingRule" test is we now fail
the "inserting an `@import`" subtests differently and the subtests
aren't independent. Specifically, we don't yet implement the checks in
`CSSRuleList::insert_a_css_rule()` that reject certain rules from being
inserted. Previously we didn't insert the `@import` rule because we
failed to parse its relative URL. Now we parse it correctly, we end up
inserting it.
Instead of wrapping all non-movable members of TransportSocket in OwnPtr
to keep it movable, make TransportSocket itself non-movable and wrap it
in OwnPtr.
The special empty value (that we use for array holes, Optional<Value>
when empty and a few other other placeholder/sentinel tasks) still
exists, but you now create one via JS::js_special_empty_value() and
check for it with Value::is_special_empty_value().
The main idea here is to make it very unlikely to accidentally create an
unexpected special empty value.
This commit removes the unused m_heap member from ConnectionFromClient.
This also works around an issue where some cmake version doesn't apply
compiler options from within a subdirectory globally.
Skia has a check in debug mode to verify that surface is only used
within one thread. Before this change we were violating this by
allocating surfaces on the main thread while using and destructing them
on the rendering thread.
This change allows us to overlap rasterization and rendering work across
threads: while the rasterization thread processes frame N, the main
thread can simultaneously work on producing the display list for frame
N+1.
The display list is an immutable data structure, so once it's created,
rasterization can be moved to a separate thread. This allows more room
for performing other tasks between processing HTML rendering tasks.
This change makes PaintingSurface, ImmutableBitmap, and GlyphRun atomic
ref-counted, as they are shared between the main and rendering threads
by being included in the display list.
This removes the old autoplay allowlist file in favor of the new site
setting. We still support the command-line flag to enable autoplay
globally, as this is needed for WPT.
Previously, all `GC::Cell` derived classes were Weakable. Marking only
those classes that require this functionality as Weakable allows us to
reduce the memory footprint of some frequently used classes.
When we build internal pages (e.g. about:settings), there is currently
quite a lot of boilerplate needed to communicate between the browser and
the page. This includes creating IDL for the page and the IPC for every
message sent between the processes.
These internal pages are also special in that they have privileged
access to and control over the browser process.
The framework introduced here serves to ease the setup of new internal
pages and to reduce the access that WebContent processes have to the
browser process. WebUI pages can send requests to the browser process
via a `ladybird.sendMessage` API. Responses from the browser are passed
through a WebUIMessage event. So, for example, an internal page may:
ladybird.sendMessage("getDataFor", { id: 123 });
document.addEventListener("WebUIMessage", event => {
if (event.name === "gotData") {
console.assert(event.data.id === 123);
}
});
To handle these messages, we set up a new IPC connection between the
browser and WebContent processes. This connection is torn down when
the user navigates away from the internal page.
The upcoming generated types will match those for pseudo-classes: A
PseudoElementSelector type, that then holds a PseudoElement enum
defining what it is. That enum will be at the top level in the Web::CSS
namespace.
In order to keep the diffs clearer, this commit renames and moves the
types, and then a following one will replace the handwritten enum with
a generated one.
Instead of bothering the GC heap with a bunch of DOMRect allocations,
we can just pass around CSSPixelRect internally in many cases.
Before this change, we were generating so much DOMRect garbage that
we had to do a garbage collection *every frame* on the Immich demo.
This was due to the large number of intersection observers checked.
We still need to relax way more when idle, but for comparison, before
this change, when doing nothing for 10 seconds on Immich, we'd spend
2.5 seconds updating intersection observers. After this change, we now
spend 600 ms.
This adds a basic settings page to manage persistent Ladybird settings.
As a first pass, this exposes settings for the new tab page URL and the
default search engine.
The way the search engine option works is that once search is enabled,
the user must choose their default search engine; we do not apply any
default automatically. Search remains disabled until this is done.
There are a couple of improvements that we should make here:
* Settings changes are not broadcasted to all open about:settings pages.
So if two instances are open, and the user changes the search engine
in one instance, the other instance will have a stale UI.
* Adding an IPC per setting is going to get annoying. It would be nice
if we can come up with a smaller set of IPCs to send only the relevant
changed settings.
When we inspect a DOM node, we currently serialize many properties for
that node, including its layout, computed style, used fonts, etc. Now
that we aren't piggy-backing on the Inspector interface, we can instead
only serialize the specific information required by DevTools.
Now that we aren't piggy-backing on the Inspector interface, we can make
our box-model serialization provide exactly the values that DevTools
requires.
The intent is that this will replace the separate Task Manager window.
This will allow us to more easily add features such as actual process
management, better rendering of the process table, etc. Included in this
page is the ability to sort table rows.
This also lays the ground work for more internal `about` pages, such as
about:config.
These commands are used for the "Edit As HTML" feature in DevTools. This
renames our existing HTML getter IPC to indicate that it is for outer
HTML. DevTools will need a separate inner HTML getter.
Site isolation is a common technique to reduce the chance that malicious
sites can access data from other sites. When the user navigates, we now
check if the target site is the same as the current site. If not, we
instruct the UI to perform the navigation in a new WebContent process.
The phrase "site" here is defined as the public suffix of the URL plus
one level. This means that navigating from "www.example.com" to
"sub.example.com" remains in the same process.
There's plenty of room for optimization around this. For example, we can
create a spare WebContent process ahead of time to hot-swap the target
site. We can also create a policy to keep the navigated-from process
around, in case the user quickly navigates back.
This has been a longstanding ergonomic issue with our IPC compiler. Non-
trivial types were previously passed by const&. So if we wanted to avoid
expensive copies, we would have to const_cast and move the data.
We now pass ownership of all transferred data to the client subclasses.
This allows us to remove const_cast from these methods, and allows us to
avoid some trivial expensive copies that we didn't bother to const_cast.
This removes a couple of places where we were constructing strings or
vectors just to transfer data over IPC. And passes some values by const&
to remove clangd noise.
For example, consider the following IPC message:
do_something(u64 page_id, String string, Vector<Data> data) =|
We would previously generate the following C++ method to encode/transfer
this message:
void do_something(u64 page_id, String string, Vector<Data> data);
This required the caller to either have to copy the non-trivial types or
`move` them in. In some places, this meant we had to construct temporary
vectors just to send an IPC.
This isn't necessary because we weren't holding onto these parameters
anyways. We would construct an IPC::Message subclass with them (which
does require owning types), but then immediate encode the message to
an IPC::MessageBuffer and send it.
We now generate code such that we don't need to construct a Message. We
can simply encode the parameters directly without needing ownership.
This allows us to take view-types to IPC parameters.
So the above example now becomes:
void do_something(u64, StringView, ReadonlySpan<Data>);
The "on_received_console_message" and "on_received_console_messages"
were indistinguishable in purpose based on their name. This renames them
to:
on_console_message_available - WebContent has output a console message
and it is available for the client to retrieve.
on_received_styled_console_messages - WebContent has replied to a
request for the available console messages.
The "styled" qualifier is used here to indicate that the messages have
been styled with CSS for display in a WebView. This is to prepare for
an upcoming patch where DevToolsConsoleClient will not stylize the
output; DevTools will want the raw JS values.
The idea originally was that the WebContentConsoleClient would perform
some amount of console handling that both InspectorConsoleClient and
DevToolsConsoleClient needed. But in implementing the DevTools console,
it's become clear that these implementations will not overlap at all. So
this patch moves the existing Inspector functionality away from
WebContentConsoleClient.
The DOMParsing spec is in the process of being merged into the HTML one,
gradually. The linked spec change moves XMLSerializer, but many of the
algorithms are still in the DOMParsing spec so I've left the links to
those alone.
I've done my best to update the GN build but since I'm not actually
using it, I might have done that wrong.
Corresponds to 2edb8cc7ee
The `cursor` property accepts a list of possible cursors, which behave
as a fallback: We use whichever cursor is the first available one. This
is a little complicated because initially, any remote images have not
loaded, so we need to use the fallback standard cursor, and then switch
to another when it loads.
So, ComputedValues stores a Vector of cursors, and then in EventHandler
we scan down that list until we find a cursor that's ready for use.
The spec defines cursors as being `<url>`, but allows for `<image>`
instead. That includes functions like `linear-gradient()`.
This commit implements image cursors in the Qt UI, but not AppKit.
This supports evaluating the script and replying with the result. We
currently serialize JS objects to a string, but we will need to support
dynamic interaction with the objects over IPC. This does not yet support
sending console messages to DevTools.
